Pioneer In-Dash CD/MP3/WMA Player - DEH-1900MP Original Retail Price - $100.00 Our Price - $79.99 Features - 50 watts x 4 peak power: The internal MOSFET50 amplifier pumps out plenty of power to your speakers for great sound. - CD-R/RW/WMA playback: Play the CDs you burned at home while you’re on the go. - One pre-amp output: Add an extra amp through the pre-amp output to run more power to your speakers or a subwoofer. - Detachable faceplate: Remove the faceplate for added security when you leave your vehicle. - Supertuner IIID digital tuner: Pull in your favorite radio stations and save them on the 18 FM/6 AM memory presets for easy access. - Auxiliary input: The DEH-1900MP features a new built-in front auxiliary input, which can be easily connected with a wide range of external devices, such as digital audio players. - Sound controls: The selectable loudness control lets you hear every detail in your music at lower volume levels and the Easy EQ with five settings (powerful, super bass, flat, natural and vocal) lets you boost the sound coming from your speakers by adjusting the settings according to the type of music you’re listening to. - Installation instructions: A vehicle-specific wiring harness, antenna adapter, installation kit and in-dash player harness are required to install this in-dash player. Use our car audio fit guide to find the accessories that fit your vehicle. Specifications Stereo - FM sensitivity - 8dBf - AM sensitivity - 18V - HD Radio capability - No - Wifi capability - No - iPod compatible - No - Bluetooth capability: No - Sound processing/equalization: Yes - Satellite radio service - None - Satellite radio-ready - No CD player - CD/MD signal to noise ratio - 94 dB - Disc/station naming: Yes - CD playback - Yes - CD-R/RW playback - Yes - MP3 playback - Yes - WMA playback - Yes -
Archive for the ‘22’ Category
the process from morning til night….recieving the subs to puttin em in…to playin em
Duration : 0:5:47
I have the 73 inch Mits wd-73733, Sony STR-DG910 receiver, Motorola comcast cable box, with Harmon Kardon 5.1 home theatre speakers.
I am not sure if I did this right but I wired the speakers as per instructions which I believe are correct. I then connected the Sony reciever HDMI out to the TV's HDMI. The Comcast box to the Sony receiver via HDMI. When I turn on the TV the picture is good but kind of grainy and definately should look better. I can only get sound to the front speakers and subwoofer. When I run the Sony receiver test all the speakers work fine but cant get them to all work with the TV going or FM. I thought HDMI would simply link them all…do I need more cables to link these? Also could it be my comcast box? It is new but I dont think it has built in HDTV….any suggestions or help from knowledgeable people is appreciated. Thanks!
Under the settings in the Comcast box, there should be another menu to access the audio portion of your Comcast box. Set the audio to use the HDMI cable. That should take care of your audio problem.
If your Comcast box is not HD, than what you are seeing is the limits of regular television. Which broadcasts at 480, your television is capable of up to 1080 which is why the picture looks grainy, you need an HD feed to see HD television.
If you have an HD box than be aware that your your HD channels will be separate than from what you are used to, something like channel 4 will be 504 or something like that.
powered by Yahoo answers
Installation and Temp testing Corsairs ICE-T30 Sub Ambient memory cooler.
Duration : 0:10:0
how to properly wire a subwoofer with dual voice coils
http://www.maxxsonics.com
Conveniently coverts a stock head units speaker wire signal (high level) into an RCA (low level) signal for use with an aftermarket amplifier.
•Converts and filters high-level factory speaker wires into ultra-clean unbalanced (RCA) low-level signals to an aftermarket amplifier
•High Level Inputs: Accepts all types of high-level input signals including floating ground type, low and high voltage speaker wires
•Audio Signal Sense: Speaker audio signal detection automatically turns on the Controller and the amplifier (MX-2 has both remote wire and signal sense capabilities)
•Remote Output: Built-in amplifier circuit activates any aftermarket +12 volt amplifier upon radio activation
•Input and Output Level Control: The system provides high level input and output level (gain) control for both full range and subwoofer signals
MANUAL Link: http://maxxsonics.net/manuals/hifonics/pdfs/MX%20OEM%20Accessory%20Manual.pdf
Duration : 0:3:46
LX18V2 The B-52 LX-18 V2 takes the traditional folded horn design to the next level. It is built to withstand the abuse of the road and is backed by a lifetime cabinet construction warranty. An internal compression chamber provides intense, clean and controlled bass. At the heart of the LX-18 V2 is the new B-52 18-200X with a cast-aluminum frame, massive 200 oz magnet, double spider anti-rocking surround and innovative 4 dual-layered, tempered voice coil. Download the Instruction Manual An aluminum front panel heat sink dissipates heat in the subwoofer compression chamber. This provides greater power handling, more overall output and cooler long-term operation. The LX-18 is finished in a rugged, impact-resistant black carpet. A rock-solid tilt-back metal bar handle for increased mobility 18″ PASSIVE FOLDED HORN SUBWOOFER Price: $599.99 Upgrades New B-52 18-200X subwoofer Increased power handling Higher overall efficiency New aluminum heatsink front panel Specifications Nominal Impedance: Frequency Response: Power Handling: SPL @ 1w1m: Peak SPL: Dimensions (W” x H” x D”): Weight (lbs): 8 Ohms 30-160 Hz 1000 watts 108 138 24 x 36 x 36 172 Void-free, 7-layer, 3/4 plywood construction for maximum durability and minimum weight. Input connections: (2) 1/4 metal phone jacks; (1) Neutrik NL 4 Speakon Connector. Reinforced internal bracings are used to fortify the LX-18. B-52 18-200X SUBWOOFER The new B-52 18-200X 18 subwoofer features a cast-aluminum frame, 200 oz magnet structure, double spider anti-rocking surround, a bumped back plate for greater excursion and 4 dual-layered tempered voice coil. The voice coil is wound with 4 layers of 25-gauge copper wire, optimally sized for this motor. INTERNAL COMPRESSION CHAMBER The B-52 18 subwoofer’s acoustic load is controlled by a specially designed horn and compression chamber that minimizes the excursion of the driver while maximizing the system’s output. The optimally
How to install subwoofer and stereo into your Toyota TacomaLX18EV2 The B-52 LX-18E V2 delivers intense long-throw bass from a powerful and mobile subwoofer. Ideal for mobile DJs, live bands and small to medium permanent installations, the LX-18E V2 features the same B-52 18-200X subwoofer used in the LX-18 V2 with a cast-aluminum frame, 200 oz magnet structure, double spider, anti-rocking surround and a 4 tempered voice coil Download the Instruction Manual An aluminum front panel heat sink dissipates heat in the subwoofer compression chamber. This provides greater power handling, more overall output and cooler long-term operation. The LX-18 is finished in a rugged, impact-resistant black carpet. A rock-solid tilt-back metal bar handle for increased mobility COMPACT 18″ PASSIVE FOLDED HORN SUBWOOFER Price: $559.99 Upgrades New B-52 18-200X subwoofer Increased power handling Higher overall efficiency New aluminum heatsink front panel Specifications Nominal Impedance: Frequency Response: Power Handling: SPL @ 1w1m: Peak SPL: Dimensions (W” x H” x D”): Weight (lbs): 8 Ohms 30-160 Hz 1000 watts 106 136 24 x 36 x 25 126 Void-free, 7-layer, 3/4 plywood construction for maximum durability and minimum weight. Input connections: (2) 1/4 metal phone jacks; (1) Neutrik NL 4 Speakon Connector. Reinforced internal bracings are used to fortify the LX-18. B-52 18-200X SUBWOOFER The new B-52 18-200X 18 subwoofer features a cast-aluminum frame, 200 oz magnet structure, double spider anti-rocking surround, a bumped back plate for greater excursion and 4 dual-layered tempered voice coil. The voice coil is wound with 4 layers of 25-gauge copper wire, optimally sized for this motor. INTERNAL COMPRESSION CHAMBER The B-52 18 subwoofer’s acoustic load is controlled by a specially designed horn and compression chamber that minimizes the excursion of the driver while maximizing the system’s output. The optimally-sized acoustic aperture of the compression chamber forms the
2 Cerwin Vega V Max “mobile” subs which are 2 ohm 1000 max/500 rms ran by a Hifonics 1600 w peak class D amp. Sub woofer wiring is “series / parallel ” at 2 ohms. Factory speakers from Volkswagen “Monsoon” components ran by an old classic 4 channel Profile “California” 400 w. JVC cd player. Song played off iPod - Nightly Gale - “In your fragrance”.
Duration : 0:1:43