
Mtx Thunderform Gmc Yukon Custom Subwoofer Enclosure Compatible With Gmc, GMC Models Yukon, Subwoofer and Speaker Accessory Type Box Hardware, Car Audio Accessory Type Subwoofer and Speaker Accessories
Continue reading »

Unloaded Single 10″” Custom-fit BassSlammer Subwoofer Enclosure Vehicle specific for 2000-2006 Chevrolet 1500 Crew Cab Installs Behind the Rear Seat 10″” Subwoofer 0.9 Cubic Feet Enclosure Volume Tan
Continue reading »

Dual 12″” down firing subwoofer enclosure for 1988-1998 Chevrolet and GMC full-size extended cab pickup truck Maximum mounting depth: 6-1/2″” Minimum mounting depth: 4-5/8″” Cutout diameter: 10-7/8″”
Continue reading »
15″ technical pro sub 3000W peak 1500W RMS on a technical pro mb-3000 sub output hittin
Duration : 0:2:14
Continue reading »
Technorati Tags: amps, bass, bump, crack, loud, pro, technical, tp, weed

CERWIN VEGA PRO CVA-118X ACTIVESERIES HIGH PERFORMANCE SUBWOOFER (18″) CUSTOM 18″ SUBWOOFER BUILT-IN AMPLIFICATION 700W RMS/1400W PEAK FREQ RESP: 39 HZ 135 HZ 4-POSITION HPF & CONTINUOUSLY SWEEPABLE LPF- POLARITY & LINK OUT CONTROLS MASTER/SLAVE OUTPUT CAST ALUMINUM GRILL & AUX HEAT SINK FOR INCREASED DRIVER PERFORMANCE HARDWOOD ENCLOSURE WITH COOLEX PAINT FINISH 4 DETAILED STATUS LEDS TOP-MOUNT 35MM POLE SOCKET Manufacturer’s Part No.: CVA-118X USA orders only (no international orders, please). Generally leaves the warehouse in 1-2 business days. Congratulations , this item includes free shipping. To take advantage of our free offer, upon checkout, select the Ground Shipping option, and enter the promotional code free_ground , and select the Apply button.
Continue reading »

Black Non-Pressed Paper Cone Specially Treated Foam Edge Suspension Stamped Steel Basket w/Hex Key Input Terminal Bumped & Vented Motor Structure Custom Designed Rubber Magnet Boot 2” Dual Layer High Temperature Kapton Voice Coil 60 + 60 oz. Heavy Double Stacked Magnet Structure 1200 Watts
Continue reading »

Black Non-Pressed Paper Cone Specially Treated Foam Edge Suspension Stamped Steel Basket w/Hex Key Input Terminal Bumped & Vented Motor Structure Custom Designed Rubber Magnet Boot 2” Dual Layer High Temperature Kapton Voice Coil 80 + 80 oz. Heavy Double Stacked Magnet Structure 1600 Watts
Continue reading »

Processed Active Sub-woofer 300W Vented bandpass active subwoofer with 320 mm driver. Enclosure in 18 mm birch plywood with internal reinforcement and scratch-resistant finish,ergonomically placed carry handles, integral speaker socket for satellite speakers. High 123dB SPL thanks to the special loading design that serves to increase efficiency with significant reduction of distortion at high volume. Reduced size in relation to power output and extension of frequency response (45Hz @ -6dB). The ideal companion for loudspeakers in the JOLLY5 and JOLLY8 series to strengthen bass frequencies and extend the response range, resulting in total increase of SPL. extend the response range, resulting in total increase of SPL. Custom 250 mm woofer with 51 mm high linear excursion coil. Built-in 300Wrms MOS-FET amplifier. ADAP (Advanced Dynamic Active Protection) designed to limit amplifier saturation and speaker excursion, guaranteeing complete reliability even in extreme conditions. Active 24dB filter with subsonic filter and 12db filtered output for satellite speakers. Control panel with: combo inputs (jack - XLR) Left and Right inputs, XLR Link, XLR filtered output for satellites, volume control, ground lift switch, 0 - 180 phase reversal switching SPECIFICATIONS Configuration way 1 Vented Bandpass Built-in amplifier W rms 300 Frequency response @-6dB 45Hz-120Hz Low frequency woofer inch 1×10 - 2 coil High frequency driver inch .. Sensitivity (@1W/1m) dB 98 Maximum SPL dB 123 Dispersion H x V .. Input impedance kOhm 22 Crossover frequency kHz active 120Hz Input connectors combo / XLR M Power cord m 5 Net dimensions (WxHxD) mm 370×480x520 Net weight kg 28 Shipping dimensions (WxHxD) mm 390×510x540 Shipping weight kg 31
Continue reading »

Unloaded Dual 10″” Custom-fit BassSlammer Subwoofer Enclosure Vehicle specific for 1999-2006 Chevrolet 1500 Extra Cab Under Rear Seat on Driver Side 10″” Subwoofer 1.9 Cubic Feet Enclosure Volume Tan
Continue reading »

Unloaded Dual 10″” Custom-fit BassSlammer Subwoofer Enclosure Vehicle specific for 2000-2006 Chevrolet / GMC 2500HD Crew Cab Fits Behind Rear Seat 10″” Subwoofers 1.64 Cubic Feet Enclosure Volume Tan
Continue reading »